Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-302
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
show etherchannel
show etherchannel
Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |
include} expression]
include} expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
If you do not specify a channel-group, all channel groups are displayed.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show etherchannel 1 detail command:
Switch> show etherchannel 1 detail
Group state = L2
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 16
Protocol: LACP
Ports in the group:
-------------------
Port: Gi0/1
------------
Port state = Up Mstr In-Bndl
Channel group = 1 Mode = Active Gcchange = -
channel-group-number
(Optional) Number of the channel group. The range is 1 to 48.
detail
Display detailed EtherChannel information.
load-balance
Display the load-balance or frame-distribution scheme among ports in the
port channel.
port channel.
port
Display EtherChannel port information.
port-channel
Display port-channel information.
protocol
Display the protocol that is being used in the EtherChannel.
summary
Display a one-line summary per channel-group.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.