Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-307
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
show interfaces
show interfaces
Use the show interfaces privileged EXEC command to display the administrative and operational status
of all interfaces or a specified interface.
of all interfaces or a specified interface.
show interfaces [interface-id | vlan vlan-id] [accounting | capabilities [module number] |
counters | description | etherchannel | flowcontrol | pruning | stats | status [err-disabled] |
switchport [backup | module number] | transceiver [properties | detail] [module number] |
trunk] [ | {begin | exclude | include} expression]
switchport [backup | module number] | transceiver [properties | detail] [module number] |
trunk] [ | {begin | exclude | include} expression]
Syntax Description
interface-id
(Optional) Valid interfaces include physical ports (including type, module, and
port number) and port channels. The port-channel range is 1 to 48.
port number) and port channels. The port-channel range is 1 to 48.
vlan vlan-id
(Optional) VLAN identification. The range is 1 to 4094.
accounting
(Optional) Display accounting information on the interface, including active
protocols and input and output packets and octets.
protocols and input and output packets and octets.
capabilities
(Optional) Display the capabilities of all interfaces or the specified interface,
including the features and options that you can configure on the interface. Though
visible in the command line help, this option is not available for VLAN IDs.
including the features and options that you can configure on the interface. Though
visible in the command line help, this option is not available for VLAN IDs.
module number
(Optional) Display capabilities, switchport configuration, or transceiver
characteristics (depending on preceding keyword) of all interfaces on the switch.
The only valid module number is 1. This option is not available if you entered a
specific interface ID.
characteristics (depending on preceding keyword) of all interfaces on the switch.
The only valid module number is 1. This option is not available if you entered a
specific interface ID.
counters
(Optional) See the
command.
description
(Optional) Display the administrative status and description set for an interface.
etherchannel
(Optional) Display interface EtherChannel information.
flowcontrol
(Optional) Display interface flowcontrol information
pruning
(Optional) Display interface trunk VTP pruning information.
stats
(Optional) Display the input and output packets by switching path for the
interface.
interface.
status
(Optional) Display the status of the interface. A status of unsupported in the Type
field means that a non-Cisco small form-factor pluggable (SFP) module is inserted
in the module slot.
field means that a non-Cisco small form-factor pluggable (SFP) module is inserted
in the module slot.
err-disabled
(Optional) Display interfaces in error-disabled state.
switchport
(Optional) Display the administrative and operational status of a switching port,
including port blocking and port protection settings.
including port blocking and port protection settings.
backup
(Optional) Display Flex Link backup interface configuration and status for the
specified interface or all interfaces on the switch.
specified interface or all interfaces on the switch.
transceiver
[detail |
properties]
[detail |
properties]
(Optional) Display the physical properties of a CWDM
1
or DWDM
2
small
form-factor (SFP) module interface. The keywords have these meanings:
•
detail—(Optional) Display calibration properties, including high and low
numbers and any alarm information.
numbers and any alarm information.
•
properties—(Optional) Display speed and duplex settings on an interface
trunk
Display interface trunk information. If you do not specify an interface, only
information for active trunking ports appears.
information for active trunking ports appears.
| begin
(Optional) Display begins with the line that matches the expression.