Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco Gigabit Ethernet Switch Module (CGESM) for HP
  5. Technical References

Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References

Download
Page of 742
   
2-331
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter  2      CGESM Switch Cisco IOS Commands
show lacp
 
show lacp 
Use the show lacp user EXEC command to display Link Aggregation Control Protocol (LACP) 
channel-group information.
show lacp [channel-group-number] {counters | internal | neighbor | sys-id} [ | {begin | exclude | 
include} expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
You can enter any show lacp command to display the active channel-group information. To display 
specific channel information, enter the show lacp command with a channel-group number. 
If you do not specify a channel group, information for all channel groups appears.
You can enter the channel-group-number option to specify a channel group for all keywords except 
sys-id.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output 
do not appear, but the lines that contain Output appear.
channel-group-number
(Optional) Number of the channel group. The range is 1 to 48.
counters
Display traffic information.
internal
Display internal information.
neighbor
Display neighbor information.
sys-id
Display the system identifier that is being used by LACP. The system 
identifier is made up of the LACP system priority and the switch MAC 
address.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.