Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-349
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
show mac address-table interface
show mac address-table interface
Use the show mac address-table interface user command to display the MAC address table information
for the specified interface in the specified VLAN.
for the specified interface in the specified VLAN.
show mac address-table interface interface-id [vlan vlan-id] [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table interface command:
Switch> show mac address-table interface gigabitethernet0/2
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0030.b635.7862 DYNAMIC Gi0/2
1 00b0.6496.2741 DYNAMIC Gi0/2
Total Mac Addresses for this criterion: 2
interface-id
Specify an interface type; valid interfaces include physical ports and port
channels.
channels.
vlan vlan-id
(Optional) Display entries for a specific VLAN; the range is 1 to 4094.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.