Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References

Use the show mls qos interface user EXEC command to display quality of service (QoS) information 
at the port level.

show mls qos interface [interface-id] [buffers | queueing | statistics] 

[ | {begin | exclude | include} expression]

Though visible in the command-line help string, the policers keyword is not supported.

User EXEC

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output 
do not appear, but the lines that contain Output appear.

This is an example of output from the show mls qos interface interface-id command when VLAN-based 
QoS is enabled:

Switch> show mls qos interface gigabitethernet0/1

GigabitEthernet0/1

trust state:not trusted

trust mode:not trusted

trust enabled flag:ena

COS override:dis

default COS:0

(Optional) Display QoS information for the specified port. Valid interfaces 
include physical ports.

(Optional) Display the buffer allocation among the queues. 

(Optional) Display the queueing strategy (shared or shaped) and the weights 
corresponding to the queues.

(Optional) Display statistics for sent and received Differentiated Services Code 
Points (DSCPs) and class of service (CoS) values, the number of packets 
enqueued or dropped per egress queue, and the number of in-profile and 
out-of-profile packets for each policer.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

12.2(25)SE1

This command was introduced.