Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-422
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
shutdown vlan
shutdown vlan
Use the shutdown vlan global configuration command to shut down (suspend) local traffic on the
specified VLAN. Use the no form of this command to restart local traffic on the VLAN.
specified VLAN. Use the no form of this command to restart local traffic on the VLAN.
shutdown vlan vlan-id
no shutdown vlan vlan-id
Syntax Description
Defaults
No default is defined.
Command Modes
Global configuration
Command History
Usage Guidelines
The shutdown vlan command does not change the VLAN information in the VTP database. The
command shuts down local traffic, but the switch still advertises VTP information.
command shuts down local traffic, but the switch still advertises VTP information.
Examples
This example shows how to shut down traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Related Commands
vlan-id
ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as
default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
shutdown
(config-vlan mode)
(config-vlan mode)
Shuts down local traffic on the VLAN when in config-VLAN mode (accessed
by the vlan vlan-id global configuration command).
by the vlan vlan-id global configuration command).
Enters VLAN configuration mode.