Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
B-12
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug interface
debug interface
Use the debug interface privileged EXEC command to enable debugging of interface-related activities.
Use the no form of this command to disable debugging.
Use the no form of this command to disable debugging.
debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
no debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
If you do not specify a keyword, all debug messages appear.
The undebug interface command is the same as the no debug interface command.
interface-id
Display debug messages for the specified physical port, identified by type
switch number/module number/ port, for example gigabitethernet 0/2.
switch number/module number/ port, for example gigabitethernet 0/2.
null interface-number
Display debug messages for null interfaces. The interface-number is always
0.
0.
port-channel
port-channel-number
port-channel-number
Display debug messages for the specified EtherChannel port-channel
interface. The port-channel-number range is 1 to 48.
interface. The port-channel-number range is 1 to 48.
vlan vlan-id
Display debug messages for the specified VLAN. The vlan-id range is 1 to
4094.
4094.
Release
Modification
12.2(25)SE1
This command was introduced.