Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
B-20
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug matm move update
debug matm move update
Use the debug matm move update privileged EXEC command to enable debugging of MAC
address-table move update message processing.
address-table move update message processing.
debug matm move update
no debug matm move update
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
undebug matm move update command is the same as the no debug matm move update command.
Related Commands
Release
Modification
12.2(25)SED
This command was introduced.
Command
Description
mac address-table
move update {receive |
transmit}
move update {receive |
transmit}
Configures MAC address-table move update feature on the switch.
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
show mac
address-table move
update
address-table move
update
Displays the MAC address-table move update information on the switch.