Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
B-23
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug mvrdbg
debug mvrdbg
Use the debug mvrdbg privileged EXEC command to enable debugging of Multicast VLAN
Registration (MVR). Use the no form of this command to disable debugging.
Registration (MVR). Use the no form of this command to disable debugging.
debug mvrdbg {all | events | igmpsn | management | ports}
no debug mvrdbg {all | events | igmpsn | management | ports}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The undebug mvrdbg command is the same as the no debug mvrdbg command.
Related Commands
all
Display all MVR activity debug messages.
events
Display MVR event-handling debug messages.
igmpsn
Display MVR Internet Group Management Protocol (IGMP) snooping-activity
debug messages.
debug messages.
management
Display MVR management-activity debug messages.
ports
Display MVR port debug messages.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays the current MVR configuration.