Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
B-33
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug platform ip dhcp
debug platform ip dhcp
Use the debug platform ip dhcp privileged EXEC command to debug DHCP events. Use the no form
of this command to disable debugging.
of this command to disable debugging.
debug platform ip dhcp [all | error | event | packet | rpc]
no debug platform ip dhcp [all | error | event | packet | rpc]
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The undebug platform ip dhcp command is the same as the no debug platform ip dhcp command.
Related Commands
all
(Optional) Display all DHCP debug messages.
error
(Optional) Display DHCP error debug messages.
event
(Optional) Display DHCP event debug messages.
packet
(Optional) Display DHCP packet-related debug messages.
rpc
(Optional) Display DHCP remote procedure call (RPC) request debug
messages.
messages.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.