Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
B-47
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug platform remote-commands
debug platform remote-commands
Use the debug platform remote-commands privileged EXEC command to enable debugging of remote
commands. Use the no form of this command to disable debugging.
commands. Use the no form of this command to disable debugging.
debug platform remote-commands
no debug platform remote-commands
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The undebug platform remote-commands command is the same as the no debug platform
remote-commands command.
remote-commands command.
Related Commands
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.