Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
B-81
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix B CGESM Switch Debug Commands
debug vqpc
debug vqpc
Use the debug vqpc privileged EXEC command to enable debugging of the VLAN Query Protocol
(VQP) client. Use the no form of this command to disable debugging.
(VQP) client. Use the no form of this command to disable debugging.
debug vqpc [all | cli | events | learn | packet]
no debug vqpc [all | cli | events | learn | packet]
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The undebug vqpc command is the same as the no debug vqpc command.
Related Commands
all
(Optional) Display all VQP client debug messages.
cli
(Optional) Display the VQP client command-line interface (CLI) debug
messages.
messages.
events
(Optional) Display VQP client event debug messages.
learn
(Optional) Display VQP client address learning debug messages.
packet
(Optional) Display VQP client packet information debug messages.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.