Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
C-11
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix C CGESM Switch Show Platform Commands
show platform mac-address-table
show platform mac-address-table
Use the show platform mac-address-table privileged EXEC command to display platform-dependent
MAC address table information.
MAC address table information.
show platform mac-address-table [aging-array | hash-table | mac-address mac-address] [vlan
vlan-id]] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
do not appear, but the lines that contain Output appear.
aging-array
(Optional) Display the MAC address table aging array.
hash-table
(Optional) Display the MAC address table hash table.
mac-address mac-address
(Optional) Display the MAC address table MAC address information,
where mac-address is the 48-bit hardware address.
where mac-address is the 48-bit hardware address.
vlan vlan-id
(Optional) Display information for the specified VLAN. The range is 1
to 4094.
to 4094.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.