Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
C-27
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Appendix C CGESM Switch Show Platform Commands
show platform stp-instance
show platform stp-instance
Use the show platform stp-instance privileged EXEC command to display platform-dependent
spanning-tree instance information.
spanning-tree instance information.
show platform stp-instance vlan-id [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
do not appear, but the lines that contain Output appear.
vlan-id
Display spanning-tree instance information for the specified VLAN. The range
is 1 to 4094.
is 1 to 4094.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.