Cisco Cisco MGX 8880 Media Gateway Release Notes
3
Release Notes for Cisco Voice Switch Service Module (VXSM) Release 5.3.10.201
Part Number OL-11295-01 Rev. B0, April 2007
VXSM Management Information Base
If the upgrade procedure is interrupted for reasons outside the control of the user (for example, a
power outage), see “Interrupted Procedure Recovery” below for instructions.
power outage), see “Interrupted Procedure Recovery” below for instructions.
Interrupted Procedure Recovery
In the event that a VXSM software upgrade procedure is interrupted (for example, power outage), and
both Primary and Secondary are stuck in 'Failed-U' state, perform the following procedure
both Primary and Secondary are stuck in 'Failed-U' state, perform the following procedure
Step 1
Execute the abortrev command:
abortrev <PrimarySlot> <NewImageRevision>
Step 2
If the primary VXSM becomes “Failed/Active” (out of Failed-U/Active), then execute the resetcd
command
command
resetcd <PrimarySlot> (
Step 3
If the secondary VXSM becomes “Failed/Active” (out of Failed-U/Active), then execute the resetcd
command:
command:
resetcd <SecondarySlot>
Step 4
Both primary and secondary VXSM cards should now have their original SW image and original DB
VXSM Management Information Base
The VXSM Management Information Base (MIB) Version 5.3 is available by request through your Cisco
VXSM product marketing representative.
VXSM product marketing representative.
Alternatively, users with CCO accounts can access the MIB and VXSM software on-line at:
http://www.cisco.com/kobayashi/sw-center/sw-wan.shtml
The procedure is:
Step 1
Log on to http://www.cisco.com/kobayashi/sw-center/sw-wan.shtml
Step 2
Locate the VXSM platform (either VXSM 8880 or VXSM 8850) and click the down arrow to expand the
“Select Release Level” drop down menu.
“Select Release Level” drop down menu.
Step 3
Select the desired MIB release level (for example, Release 5300) to display a list of downloadable files.
Step 4
Click on the desired file (for example, mgx8850-fw-5300.tar).
Step 5
Read the license agreement and, if approved, click Accept.
Step 6
In the Software Download dialog box, click on Download: filename (where filename is the name of the
file selected for download). This step starts the download procedure.
file selected for download). This step starts the download procedure.
Step 7
Follow the normal file download procedure for your computer.
Step 8
When the file has been downloaded, untar or unzip the downloaded file. The MIB file is included in the
downloaded file and is listed as a tar file (for example mgx8850rel5300mib.tar).
downloaded file and is listed as a tar file (for example mgx8850rel5300mib.tar).