Cisco Cisco Access Registrar 5.0 Troubleshooting Guide
How to Change the RexAcctScript to Produce a
CSV−Format in the Accounting File
CSV−Format in the Accounting File
Document ID: 13384
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Edit the RexAcctScript
Related Information
Prerequisites
Requirements
Components Used
Conventions
Edit the RexAcctScript
Related Information
Introduction
This document explains how to manually edit the RexAcctScript so that your accounting log files reflect a
CSV−format.
CSV−format.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document applies to all versions of Cisco Access Registrar.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Edit the RexAcctScript
If you want your accounting log files to reflect a CSV−format that can be used in your billing applications,
edit the RexAcctScript manually and recompile it.
edit the RexAcctScript manually and recompile it.
The file is located at:
/opt/AICar1/examples/rexacctscript/AcctAsScript.cpp
•
To change the format of the accounting, make these changes:
Line Number
From
To