Cisco Cisco Unified Customer Voice Portal 11.0(1)
ip address 10.0.1.99 255.255.255.0
standby 1 ip 10.0.1.100
standby 1 preempt
standby 1 priority 100
On both Gatekeepers, configure identical gatekeeper configurations, for example:
gatekeeper
! Enter gatekeeper configuration mode
zone local gk-sj cisco.com 10.0.1.100
! Define local zone using HSRP virtual address as gatekeeper
RAS address
Alternate Gatekeeper Configuration
Configure the following examples using the Unified CVP VBAdmin tool:
Examples:
•
Example 1:
set GK "10.0.1.100, 10.0.2.100, 10.0.3.100"
This example sets up three gatekeepers, which could be registered to the H.323 Service. In
each case, the H.323 Service registers to the first local zone that is configured in that
gatekeeper. It also uses the default RAS port 1719.
each case, the H.323 Service registers to the first local zone that is configured in that
gatekeeper. It also uses the default RAS port 1719.
•
Example 2:
setGK "10.0.1.100:zone1:1718, 10.0.2.100"
This example causes the H.323 Service to first attempt to register to gatekeeper 10.86.129.33
on port 1718 with local zone "zone1". If that gatekeeper fails, the H.323 Service subsequently
attempts to register to 10.86.129.34 on port 1719 with the first local zone defined on that
gatekeeper.
on port 1718 with local zone "zone1". If that gatekeeper fails, the H.323 Service subsequently
attempts to register to 10.86.129.34 on port 1719 with the first local zone defined on that
gatekeeper.
See Also
Refer to the Operations Console online help for more information.
Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)
153
Chapter 2: Configuration Overview
Gatekeeper Redundancy