Cisco Cisco Customer Voice Portal Downloads

When defining multiple List of CallServer base URLs settings, enclose
them in quotes (for example: 

).

Changes to this value take effect immediately.

Note: For more information, see the "

" section.

Maximum number of times the H.323 Service will try to connect to
the Call Server before failing and reporting an error.

Default: 3

System shutdown and startup necessary for changes to take effect.

Number of seconds the H.323 Service should wait for a response from
the Call Server before timing out and generating an error.

Note: This setting must be greater than the IVR Service Timeout
setting on the IVR tab in the Operations Console. (For information

about setting the IVR Service Timeout setting, refer to the Operations
Console online help.)

Default: 7 seconds

System shutdown and startup necessary for changes to take effect.

Length of time in seconds to wait for additional instructions from
Unified ICME after the Called Party (that is, agent) hangs up. If no
instructions are received, the H.323 Service disconnects the caller.

Default: 2

System shutdown and startup necessary for changes to take effect.

When this value is set to on, call events will be logged to the console
and log files. This is the lowest level of debugging, recommended

when you want to see basic call events (call arrived, call transferred,
call disconnected).

Valid Values: on and off

Default: off.

When a call arrives at the H.323 Service with the H323
presentationIndicator value set to “Restricted,” the H.323 Service

needs to hide some portion or all of the caller ID before passing the
CallerID to Unified ICME. This setting controls how many digits
will be stripped from the rightmost portion of the callerID before
passing it to Unified ICME. A value of 0 will leave the callerID as

Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)