Cisco Cisco Unified Customer Voice Portal 10.0(1)
Step 4
Create the application in Call Studio. This application must have the same name as the
CVPSelfService-app defined in the gateway configuration above.
CVPSelfService-app defined in the gateway configuration above.
Step 5
Then:
If:
Save and deploy the Call Studio application locally; create a
VXML Server (Standalone) configuration; and upload and transfer
the application script file to the desired VXML Server.
VXML Server (Standalone) configuration; and upload and transfer
the application script file to the desired VXML Server.
If there is an operations
console
console
Save and Deploy the Call Studio Application to the desired
installed VXML Server. Then, on the VXML Server, run the
installed VXML Server. Then, on the VXML Server, run the
there is not an operations
console
console
deployallapps.bat file (c:/Cisco/CVP/VXMLServer/admin
directory) .
directory) .
See Also
Refer to the Call Studio documentation for complete instructions.
Sample Gateway Configuration
VXML Server:
application
service CVPSelfService
flash:CVPSelfServiceBootstrap.vxml
paramspace english language en
paramspace english index 0
paramspace english location flash:
paramspace english prefix en
service HelloWorld flash:CVPSelfService.tcl
paramspace english language en
paramspace english index 0
paramspace english location flash
param CVPBackupVXMLServer 12.34.567.890
paramspace english prefix en
param CVPSelfService-app HelloWorld
param CVPSelfService-port 7000
param CVPPrimaryVXMLServer 12.34.567.890
dial-peer voice 4109999 voip /* for IP originated call */
service HelloWorld
incoming called-number 88844410..
dtmf-relay rtp-nte h245-signal h245-alphanumeric
codec g711ulaw
dial-peer voice 4109999 voip /* for TDM originated call */
service HelloWorld
incoming called-number 88844420..
direct-inward-dial
Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)
299
Chapter 7: Configuring VXML Solution
VXML Server Standalone Solutions