Cisco Cisco Customer Voice Portal 8.0(1)

Telnet to the voice gateway and log in as follows:

a.

From the Windows taskbar, select Start > Run.

The Run window displays.

b.

In the Run window, enter: 

 and click Ok.

Where: <Gateway IP> is the IP address of the voice gateway you are using for these exercises.

The User Access Verification window displays.

c.

Enter the password for the gateway.

The hostname prompt for the gateway displays. Example: MyGateway

You must be in enable mode to copy the gateway's configuration. At the gateway's hostname
prompt, enter 

 and press 

. Then enter the password you established for your gateway's

enable mode.

The prompt changes to the gateway's hostname followed by a # sign. Example: MyGateway#

To restore the gateway's running configuration, if you have changed the gateway's startup
configuration, first restore it from a saved configuration file as follows:

a.

Where: <saved_config> is the name of a file that contains your original, simplified, working
gateway configuration. (No file extension is needed for this command.)

b.

At: 

 press 

 to confirm the filename

and action.

The system responds with a confirmation message.

To make the running configuration the same as the restored startup configuration, "reload" the
gateway by entering and confirming the reload command:

a.

b.

Modify the Supplied GWConfigChgs_Comprehensive.txt File to Use with the Comprehensive Exercise

The configuration for your gateway must be updated to support this exercise. The
changes/additions you need for this exercise are found in GWConfigChgs_Comprehensive.txt
which is available at the following Cisco URL:

Getting Started with Cisco Unified Customer Voice Portal Release 8.0(0)