Cisco Cisco Unified Customer Voice Portal 10.5(1)

To create a Call Studio project, choose File > New > Call Studio Project.

The New Call Studio Project wizard starts.

For the project name enter, in lower case: customhelloworld.

For the location leave Use default location checked.

You should see a window similar to the following.

Figure 33: Call Studio - New Project Named

For this exercise, you will use the default settings on the remaining wizard new project
configuration windows. Click Next to examine each window, if desired.

When you are finished examining the various settings, click Finish to create the new project.

The Call Studio Builder's workspace displays a Start of Call element as the first element in a
new voice application. (Refer to the next task to see an example of the Start of Call element.)

Create the Voice Application Call Flow and Validate It

Complete the following steps to use the Call Studio Builder function to create a custom response
voice application for the test phone call.

If you have not created the project customhelloworld, complete the steps in 

.

From Elements tree > Subdialog Elements > Cisco, drag and drop CVP Subdialog Start and
CVP Subdialog Return elements to the call flow window and place them under the Start of
Call element as shown in the figure below Step #3.

Getting Started with Cisco Unified Customer Voice Portal Release 8.0(0)