Cisco Cisco RV325 Dual Gigabit WAN VPN Router Release Notes
2
Release Notes for Cisco RV320/RV325 Firmware Version 1.2.1.13
Release Notes
•
The IP and MAC binding table are sorted by the IP address.
•
Support configurable VLAN ID range 2-4092.
•
Support configurable TCP/UDP session timeout.
•
Add reset button in traffic statistics and system statistics page.
•
Support hex type for option 82 circuit ID.
•
Enhance the daylight saving setting.
•
Support SSH access.
•
Support CLI for LAN and ACL.
•
Support SSL VPN virtual passage for Win7(64bit) IE10 and Win8.1 IE11. (See
the “SSL VPN” section in the Administration Guide for installation.)
the “SSL VPN” section in the Administration Guide for installation.)
For detailed list of supported dongles, please refer to
Resolved Issues
•
Sometimes the DNS process is gone and can not reply to the DNS request
from LAN network.(CSCus07365)
from LAN network.(CSCus07365)
•
UPNP does not work on non-default VLAN. (CSCuq40914)
•
RV32x does not handle unsupported DHCP options. (CSCus23264)
•
Critical error when more than 30 services in Service Management.
(CSCuo71846)
(CSCuo71846)
•
Sometimes the router will reboot after removing the 3G/4G USB dongle
and receive the multicast traffic from LAN network. (CSCur98498)
and receive the multicast traffic from LAN network. (CSCur98498)
•
Hangs when using multiple VPNs. (CSCuo75962)
•
DHCP doesn’t work if only enabled for one VLAN. (CSCut07168)
•
Sequential IP addresses display in IP & MAC binding table view.
(CSCut84147)
(CSCut84147)