Cisco Cisco Application Extension Platform for SRE
Cisco Application eXtension Platform 1.1 User Guide
Verifying and Troubleshooting
119
Cisco Application eXtension Platform 1.1 User Guide
OL-14815-01
Router#
show processes
Displays a list of the running application
processes.
processes.
Displays the state of the sshd process.
Router#
show processes memory
Displays information about the sshd
process when it is running.
process when it is running.
Router#
show running-config
Displays the configuration commands that
are in effect.
are in effect.
Router#
show startup-config
Displays the startup configuration.
Router#
show tech-support
Displays general information about the host
router that is useful to Cisco technical
support for problem diagnosis.
router that is useful to Cisco technical
support for problem diagnosis.
Router#
show version
Displays information about the loaded
router-software or
service-module-bootloader version and also
hardware and device information.
router-software or
service-module-bootloader version and also
hardware and device information.
Router#
test scp ping
Pings the service module to check network
connectivity.
connectivity.
Router#
verify
Displays version information for installed
hardware and software.
hardware and software.
SE-Module>
ping
Pings a specified IP address to check
network connectivity (does not accept a
hostname as destination).
network connectivity (does not accept a
hostname as destination).
SE-Module>
show arp
Displays the current Address Resolution
Protocol (ARP) table.
Protocol (ARP) table.
SE-Module>
show clock
Displays the current date and time.
SE-Module>
show config
Displays the current bootloader
configuration as entered by the configure
command.
configuration as entered by the configure
command.
SE-Module>
show hosts
Displays the default IP domain name,
lookup style, name servers, and host table.
lookup style, name servers, and host table.
SE-Module>
show interfaces
Displays information about the
service-module interfaces.
service-module interfaces.
SE-Module>
show interface
GigabitEthernet
GigabitEthernet
Displays basic interface configuration
information about an Ethernet interface.
information about an Ethernet interface.
SE-Module>
show ntp status
Displays information about Network Time
Protocol (NTP).
Protocol (NTP).
SE-Module>
show processes
Displays a list of the running application
processes.
processes.
SE-Module>
show running-config
Displays the configuration commands that
are in effect.
are in effect.
Table 9
Common Verification and Troubleshooting Commands (continued)
Configuration Mode
Command
Purpose