Cisco Cisco CRS-X Multishelf System Installation Guide

Procedure

Step 1

Using a screwdriver, remove the six panhead M5 x10-mm screws (three screws at the bottom of the bracket and three at
the top) that connect the right-front support bracket to the chassis. (See the following figure.)

Figure 8: Chassis Support Brackets

Step 2

Using the 10-mm socket wrench, remove the two 3/4-in. bolts that connect the left front support bracket to the pallet.

Step 3

Set the support bracket aside carefully.

Step 4

Repeat Step 1 through Step 3 for the remaining three support brackets.

Transferring the Chassis to a Mechanical Lifting Device

Because of the high chassis weight (with fans, PDUs, blanks, and impedance carriers as shipped), you
should not attempt to move or lift it without a mechanical lifting device.

Caution