Cisco Cisco CRS-X Multishelf System Installation Guide
We recommend that you align the rear mounting bracket so that there is 14 inches between the “face” of the rear
bracket and the face of the front mounting bracket (as shown in the figure below).
bracket and the face of the front mounting bracket (as shown in the figure below).
Note
Figure 12: Securing the Rear Mounting Bracket to the Rack
Step 2
Use a medium (number 2) Phillips screwdriver and the screws provided in the package to secure the rear of the chassis to
the rack with the left and right rear vertical mounting brackets.
the rack with the left and right rear vertical mounting brackets.
What to Do Next
Proceed with installing the Cisco CRS 4-slot LCC. For details, see the Cisco CRS Carrier Routing System 4-Slot Line Card Chassis
Installation Guide .
Installation Guide .
When You Return Product Components
Before preparing for shipment of the product or product components back to Cisco, you must contact Cisco technical support and
provide them with the details of your difficulty. Technical support needs to confirm your product or component failure prior to
assigning an RMA number for return shipment. For additional information, see the
provide them with the details of your difficulty. Technical support needs to confirm your product or component failure prior to
assigning an RMA number for return shipment. For additional information, see the
Service Request, on page 33
section.
30