Cisco Cisco CRS-X Multishelf System Installation Guide
Step 4
Use the 3/8-in. ratchet wrench with 12-mm hex bit (provided by Cisco) secure the bolts to the interior floor block and
chassis. (See this figure.)
chassis. (See this figure.)
Figure 30: Alternate Chassis Floor-Mounting Kit
Four bushings
3
Twelve 12-mm bolts
1
Four mounting block
2
Step 5
Repeat these steps to install the floor-mounting block on the other side of the chassis.
What to Do Next
After performing this task, you need to unpack and install all remaining chassis components. See the next section and then go to the
Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Installation Guide to locate the installation instructions for the individual
components.
Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Installation Guide to locate the installation instructions for the individual
components.
Unpacking Chassis Component Shipping Pallets
The remaining shipping boxes and pallets are now ready to be delivered from receiving/shipping dock or a site holding area to the
final location of the chassis.
final location of the chassis.
Steps
To unpack the pallets, follow these steps:
47