APC HP Mounting Rails - 1 set AR8001 User Manual
Product codes
AR8001
NetShelter
™
Mounting Rail Kit for HP Shelving –
AR8001
990-5016A
Rev. 3
6/00
Overview
The Mounting Rail Kit for HP Shelving (AR8001) allows you to install into an American Power Conver-
sion (APC™) NetShelter™ the Hewlett-Packard (HP) NetServer Rack Mount Kits listed in Table 1 below.
There are four sets of instructions in this document. Refer to Table 1 to determine which set of instructions
to use for the HP kit you are installing.
sion (APC™) NetShelter™ the Hewlett-Packard (HP) NetServer Rack Mount Kits listed in Table 1 below.
There are four sets of instructions in this document. Refer to Table 1 to determine which set of instructions
to use for the HP kit you are installing.
Inventory
Table 2 shows the parts that are included in the Mounting Rail Kit for HP Shelving (AR8001). Some of the
parts used in the installation are supplied with the HP kits.
parts used in the installation are supplied with the HP kits.
Table 1: HP NetServer Rack Mount Kits
If you are using
HP NetServer…
… use HP
NetServer Rack
Mount Kit model…
NetServer Rack
Mount Kit model…
…and refer
to Section…
LM, LS, LF, LH
J1451A/B
2
LC
J1452A/B
2
LX Pro, LXe
J1455A
3
LCII
J1456A
1
LHII, LH Pro, LD Pro
J1491A
2
E Series
J1496A
1
LXr Pro
Kit included with
server
server
4
Table 2: Inventory of APC Mounting Rail Kit for HP Shelving (AR8001)
Item
Quantity
Figure
Mounting Rail
2
Nut, Caged, M6
3