Sony DSX-S300BTX DSXS300BTX User Manual
Product codes
DSXS300BTX
37
1
” appears during connection.
2
Turn down the volume on this unit.
3
Press (SOURCE/OFF) repeatedly until
“Bluetooth Audio” appears.
“Bluetooth Audio” appears.
4
Operate the audio device to start
playback.
playback.
5
Adjust the volume on this unit.
Adjusting the volume level
The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
between the unit and the Bluetooth audio device.
1 Start playback of the Bluetooth audio device at
a moderate volume.
2 Set your usual listening volume on the unit.
3 Press the multi way encoder.
4 Rotate the multi way encoder until “Bluetooth
Audio Level” appears, then press it.
5 Rotate the multi way encoder to adjust the
input level (“+ 18dB” – “0dB” – “– 8dB”).
Operating an audio device with this
unit
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
*1 Depending on the device, it may be necessary to
press twice.
*2 Press repeatedly until the desired setting appears.
*3 You can also shuffle play by pressing and holding
*3 You can also shuffle play by pressing and holding
(ZAP/SHUF) on this unit.
Operations other than the above should be
performed on the audio device.
performed on the audio device.
Notes
• Depending on the audio device, its information, such
• Depending on the audio device, its information, such
as title, track number/time, playback status, etc.,
may not be displayed on this unit. The information is
displayed during Bluetooth Audio playback only.
may not be displayed on this unit. The information is
displayed during Bluetooth Audio playback only.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Other settings
Initializing Bluetooth Settings
You can initialize all the Bluetooth-related
settings from this unit.
settings from this unit.
1
Press and hold the multi way encoder.
The menu list appears.
The menu list appears.
2
Rotate the multi way encoder to select
“BT Initialize,” then press it.
The confirmation appears.
“BT Initialize,” then press it.
The confirmation appears.
3
Rotate the multi way encoder to select
“Yes.”
“Initializing...” appears while initializing the
Bluetooth settings.
“Yes.”
“Initializing...” appears while initializing the
Bluetooth settings.
4
Press
(BACK).
The display returns to normal reception/play
mode.
mode.
Note
When disposing of this unit, phonebook data should
be deleted with “BT Initialize.”
When disposing of this unit, phonebook data should
be deleted with “BT Initialize.”
To
Do this
Play
Press (PAUSE).*
1
Pause
Press (PAUSE).*
1
Skip tracks
Push the multi way encoder
left/right [once for each track].
left/right [once for each track].
Reverse/
Fastforward
Fastforward
Push and hold the multi way
encoder left/right.
encoder left/right.
Repeat play
Press (REP) on the card
remote commander.*
remote commander.*
2
Shuffle play
Press (SHUF) on the card
remote commander.*
remote commander.*
2
*
3
Skip albums
Push the multi way encoder up/
down.
down.