Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco DX70
  5. Technical References

Cisco Cisco DX70 Technical References

Download
Page of 173
D15363.02
 Cisco TelePresence DX70 and DX80 API Reference Guide CE8.2, SEPTEMBER 2016. 
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 
56
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration Network [1] IPv4 SubnetMask
Define the IPv4 network subnet mask. Applicable only when the Network IPv4 Assignment is 
set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network 
n
 IPv4 SubnetMask: "
SubnetMask
"
where
n
: Index that identifies the network. Range: 1..1
SubnetMask
: String (0, 64)
A valid IPv4 address.
xConfiguration Network [1] IPv6 Assignment
Define how the system will obtain its IPv6 address and the default gateway address. This 
setting only applies to systems on IPv6 networks.
Requires user role: ADMIN
Default value: Autoconf
USAGE:
xConfiguration Network 
n
 IPv6 Assignment: 
Assignment
where
n
: Index that identifies the network. Range: 1..1
Assignment
: Static/DHCPv6/Autoconf
Static: The codec and gateway IP addresses must be configured manually using the 
Network IPv6 Address and Network IPv6 Gateway settings. The options, for example 
NTP and DNS server addresses, must either be set manually or obtained from a 
DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to 
use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. 
See RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will 
be ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See 
RFC 4862 for a detailed description. The options, for example NTP and DNS server 
addresses, must either be set manually or obtained from a DHCPv6 server. The 
Network IPv6 DHCPOptions setting determines which method to use.
xConfiguration Network [1] IPv6 Address
Define the static IPv6 network address for the system. Applicable only when the Network IPv6 
Assignment is set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network 
n
 IPv6 Address: "
Address
"
where
n
: Index that identifies the network. Range: 1..1
Address
: String (0, 64)
A valid IPv6 address including a network mask. Example: 2001:DB8::/48
xConfiguration Network [1] IPv6 Gateway
Define the IPv6 network gateway address. This setting is only applicable when the Network 
IPv6 Assignment is set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network 
n
 IPv6 Gateway: "
Gateway
"
where
n
: Index that identifies the network. Range: 1..1
Gateway
: String (0, 64)
A valid IPv6 address.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration