Cisco Cisco DX70 Technical References
D15363.02
Cisco TelePresence DX70 and DX80 API Reference Guide CE8.2, SEPTEMBER 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
73
Cisco TelePresence DX70 and DX80
API Reference Guide
Standby configuration
xConfiguration Standby Control
Define whether the system should go into standby mode or not.
Requires user role: ADMIN
Default value: On
Default value: On
USAGE:
xConfiguration Standby Control:
Control
where
Control
: Off/On
Off: The system will not enter standby mode.
On: The system will enter standby mode when the Standby Delay has timed out.
Requires the Standby Delay to be set to an appropriate value.
xConfiguration Standby Delay
Define how long (in minutes) the system shall be in idle mode before it goes into standby mode.
Requires the Standby Control to be enabled.
Requires user role: ADMIN
Default value: 10
Default value: 10
USAGE:
xConfiguration Standby Delay:
Delay
where
Delay
: Integer (1..480)
Set the standby delay (minutes).
SystemUnit configuration
xConfiguration SystemUnit Name
Define the system name. The system name will be sent as the hostname in a DHCP request
and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Default value: ""
Default value: ""
USAGE:
xConfiguration SystemUnit Name: "
Name
"
where
Name
: String (0, 50)
Define the system name.
Define the system name.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration