Cisco Cisco DX70 Installation Guide

Provisioning set-up

(When using a provisioning system)
If in doubt for any of the parameters below, contact your provi-

sioning system provider.
See the administrator guide for your product, to find more  

information about the individual provisioning settings.

Select provisioning infrastructure

1.  Go to the 

tab, and click

.

2.  Open the 

 settings from the left column.

3.  Select a provisioning infrastructure from the 

drop 

down list:

• TMS – Cisco TelePresence Management System (Not avail-

able for SX10)

• VCS – Cisco Video Communication Server 
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS, 

then TMS and finally CUCM. 

• Edge - CUCM via Expressway

If you select 

, all configurations must be set manually.

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1.  It may be required to authenticate the video system with 

Cisco TMS. If so, enter 

 and 

in the 

respective input fields.

2.  Enter the IP address or DNS name of the Cisco TMS server 

in the 

input field under the 

 

heading.*

3.  Enter the

 to the provisioning service in the corre-

sponding input field.

VCS 

1.  It may be required to authenticate the video system with 

the Cisco VCS. If so, enter 

 and 

 in the 

respective input fields.

2.  Enter the IP address or DNS name of the Cisco VCS in the 

input field under the 

 heading.*

3.  Enter the SIP

 for the Cisco VCS in the correspond-

ing input field.

Have a look at the

 Cisco VCS provisioning 

appendix for more 

information about VCS provisioning.

Unified Communications Manager

Enter the IP address or DNS name of the CUCM provisioning 

server in the 

 input field under the 

 

heading.*
You can find more details about setting up CUCM provisioning 

in the 

guide. 

CUCM via Expressway**

Upon ordering the CUCM via Expressway service, you have 

received a username, password, and domain name. 

1.  Enter the username in the 

 input field.

2.  Enter the password in the 

 input field.

3.  Enter the domain name in the 

 input field under the 

 heading.

In some cases, you must manually enter the Expressway 

address. Enter the address you have received upon ordering 

in the 

 input field under the 

 heading.

* The DHCP server can be set up to provide the External Manager address 

automatically (Option 242 for TMS; Option 150 for UCM). Any input set up 

here overrides the setting provided by DHCP.

**For CUCM via Expressway to show up as provisioning option for your 

video system, you must have the encryption option key installed. 

If you are changing a value setting, 

you have to always click 

to confirm the change.

Cisco TelePresence Video Systems

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

15

Getting Started Guide

Introduction

User interfaces

Web interface

Setup assistant

Appendices



Touch

Web interface