Cisco Cisco DX70 Maintenance Manual
D15362.01 DX70 and DX80 Administrator Guide CE8.2, JUNE 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
7
Cisco DX70 and DX80
Administrator Guide
Power On and Off
Power Off or restart the system remotely
Sign in to the web interface and navigate to
Maintenance >
Restart
.
Restart the system
Click
Restart device...
and confirm your choice.
It takes a few minutes before the system is ready for use.
Power Off the system
Click
Shutdown device...
and confirm your choice.
You cannot power On the system remotely.
Restart and standby using the Touch
interface
Restart the system
1. Select the settings icon (cogwheel) on the home
screen.
2. Select
System Information > Restart
.
3. Select
Restart
again to confirm your choice.
Enter/exit standby mode
1. Select the settings icon (cogwheel) on the home
screen.
2. Select
Standby
.
Switch on
The video system does not start
automatically. Press the power
button gently, and hold for a few
seconds.
The LED is lit while the video
system starts up.
Switch off
Press the power button gently
and hold until the light goes out.
Enter/exit standby mode
Press the power button briefly.
It takes a few seconds before
the unit enters standby.
Power On/Off with the Power button
The power button, with LED indicator, is placed on the front as shown in the illustration.
Power button with
LED indicator
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Introduction