Cisco Cisco Cius 4G Design Guide
Cisco Cius Wireless Deployment Guide
100
Bluetooth Settings
Cisco Cius has Bluetooth 2.1 + EDR (Enhanced Data Rate) support, which enables hands-free communications.
To pair a Bluetooth device to Cisco Cius, follow the instructions below.
To pair a Bluetooth device to Cisco Cius, follow the instructions below.
• Navigate to Settings > Wireless & networks > Bluetooth Settings
• Ensure that Bluetooth is set to On.
Ensure Bluetooth is enabled in the Cisco Unified Communications Manager; otherwise the option will be greyed out.
• Select Scan for devices.
(Ensure the Bluetooth device is in pairing mode)
• Select the Bluetooth device after it is displayed in the list.
• Configure the Bluetooth device name for Cisco Cius as necessary by selecting Device Name.
• Cisco Cius visibility via Bluetooth can optionally be enabled temporarily by placing a check mark next to
Discoverable.
• Cisco Cius will then attempt to pair will attempt to use the pin code 0000.
If unsuccessful, enter the pin code when prompted.
• Once paired, then Cisco Cius will attempt to connect to the Bluetooth device.
• Tapping the Bluetooth device then selecting OK will disconnect the currently connected Bluetooth device.