Cisco Cisco IOS Software Release 12.0(17)S
Frame Relay Extended Addressing
Command Reference
9
Cisco IOS Release 12.0(17)S
show frame-relay pvc interface
router#show frame-relay pvc interface pos3/1 4000
PVC Statistics for interface POS3/1 (Frame Relay NNI)
DLCI = 4000, DLCI USAGE = SWITCHED, PVC STATUS = INACTIVE, INTERFACE = POS3/1
LOCAL PVC STATUS = INACTIVE, NNI PVC STATUS = ACTIVE
input pkts 5 output pkts 5 in bytes 520
out bytes 520 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
switched pkts 10
Detailed packet drop counters:
no out intf 0 out intf down 0 no out PVC 0
in PVC down 0 out PVC down 0 pkt too big 0
pvc create time 3w4d, last time pvc status changed 1w0d
show frame-relay route
router#show frame-relay route
Input Intf Input Dlci Output Intf Output Dlci Status
POS3/1 21 POS3/0 20 inactive
POS3/1 230 POS5/0 230 inactive
POS3/2 100 POS5/2 100 inactive
POS3/2 230 POS5/2 230 inactive
POS5/0 100 POS3/1 100 inactive
POS5/0 230 POS3/1 230 inactive
POS5/2 100 POS3/2 100 inactive
POS5/2 230 POS3/2 230 inactive
POS3/1 2100 POS5/0 100 inactive
Note
Extended interfaces have their routes shown at the bottom of the list. This is true only for the
interfaces with “extended” encapsulation: if a DCE interface routes to an Extended Address
interface, the route will be shown as per normal ordering.
interfaces with “extended” encapsulation: if a DCE interface routes to an Extended Address
interface, the route will be shown as per normal ordering.
Command Reference
To enable Extended Addressing for Frame Relay, a new a new encapsulation type has been added to the
command encapsulation frame-relay:
command encapsulation frame-relay:
•
encapsulation frame-relay extended
All other commands used with this feature are documented in the Cisco IOS Release 12.0 command
reference publications. These publications are summarized in the
reference publications. These publications are summarized in the
section.