Cisco Cisco IOS Software Release 12.3(14)T
Second-Generation 1- and 2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Cards
How to Configure Second-Generation 1- and 2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Cards
5
Cisco IOS Release 12.3(14)T
Configuring the Second-Generation 1- and 2-Port T1/E1 Multiflex Trunk
Voice/WAN Interface Cards
Voice/WAN Interface Cards
Perform this task to configure a T1 or E1 interface with independent clocking enabled and integrated
drop and insert on a multiflex trunk voice/WAN interface card.
drop and insert on a multiflex trunk voice/WAN interface card.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
card type {e1 | t1} slot subslot
4.
voice-card slot
5.
codec complexity {flex [reservation-fixed {high | medium}] | high | medium}
6.
controller {e1 | t1} slot/port
7.
framing {sf | esf}
or
framing {crc4 | no-crc4}
or
framing {crc4 | no-crc4}
8.
linecode {ami | b8zs}
or
linecode {ami | hdb3}
or
linecode {ami | hdb3}
9.
clock source {line [primary | bits | independent] | internal [independent] | free-running}
10.
ds0-group ds0-group-number timeslots timeslot-list type {e&m-delay-dial | e&m-fgd |
e&m-immediate-start | e&m-wink-start | ext-sig | fgd-eana | fxo-ground-start | fxo-loop-start |
fxs-ground-start | fxs-loop-start}
or
pri-group [timeslots range]
e&m-immediate-start | e&m-wink-start | ext-sig | fgd-eana | fxo-ground-start | fxo-loop-start |
fxs-ground-start | fxs-loop-start}
or
pri-group [timeslots range]
11.
voice-port {slot-number/subunit-number/port | slot/port:ds0-group-number}
12.
exit
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.