Cisco Cisco IOS Software Release 12.4(4)T
14
Cisco V.150.1 Minimum Essential Requirements Configuration Guide
Configuration Task Flow
Configuring Modem Pass-through Calls
This task configures modem pass-through calls on the gateway. Perform this task to enable
interoperation with the SCCP gateway running versions of Cisco IOS software prior to Cisco IOS
Release 12.4(4)T that are not V.150.1-capable.
interoperation with the SCCP gateway running versions of Cisco IOS software prior to Cisco IOS
Release 12.4(4)T that are not V.150.1-capable.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
voice service voip
4.
modem passthrough nse [payload-type number] codec {g711ulaw | g711alaw} [redundancy
[maximum-sessions sessions]]
[maximum-sessions sessions]]
5.
exit
DETAILED STEPS
Step 4
stcapp ccm-group
group-id
Example:
Router(config)# stcapp ccm-group 1
Configures the Cisco Unified Communications Manager
group number for use by the STCAPP.
group number for use by the STCAPP.
Step 5
stcapp
Example:
Router(config)# stcapp
Enables the STCAPP.
Step 6
exit
Example:
Router(config)# exit
Exits the current configuration mode.
Command or Action
Purpose
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
voice service voip
Example:
Router(config)# voice service voip
Enters voice-service configuration mode and specifies VoIP
encapsulation.
encapsulation.