Cisco Cisco IOS Software Release 12.2(4)XL Release Notes

Page of 26
 
8
Release Notes for Cisco 2600 Series for Cisco IOS Release 12.2  XL
OL-1940-01 Rev. E3
New and Changed Information
New and Changed Information
New Hardware and Software Features from Cisco IOS Release 12.2(4) XL1 to 
Cisco IOS Release 12.2(4) XL5
No new hardware and software features are supported by the Cisco 2600 series for Cisco IOS 
Release 12.2(4) XL1 to Cisco IOS Release 12.2(4) XL5.
New Hardware Features in Cisco IOS Release 12.2(4) XL
The following new hardware feature is supported by the Cisco 2600 series for Cisco IOS 
Release 12.2(4) XL:
1 Port G.SHDSL WAN Interface Card 
G.SHDSL is ATM-based, multirate, high-speed (up to 2.3 MB), symmetrical digital subscriber line 
digital data transfer between a single customer premises equipment (CPE) subscriber and a central 
office. 
G.SHDSL is supported on the G.SHDSL WAN interface card, a 1-port WAN interface card (WIC) for 
Cisco 2600 series routers. 
The G.SHDSL WIC is compatible with the Cisco 6015, Cisco 6130, Cisco 6160, and Cisco 6260 Digital 
Subscriber Line Access Multiplexers (DSLAMs). The DSLAM must be equipped with G.SHDSL line 
cards that are compatible with the DSL service to be configured.
The G.SHDSL WIC supports ATM Adaptation Layer 2 (AAL2), ATM Adaptation Layer 5 (AAL5), and 
various classes of quality of service (QoS) for both voice and data service. 
Refer to the following document for further information:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122x/122xl/122x
l4/ft_gdsl4.htm
Table 4
Feature List by Feature Set for the Cisco 2600 Series Routers, Part 2of 2
Features
Software Images by Feature Sets
Enterprise 
Plus
Enterprise Plus 
IPsec 3DES 
Enterprise/FW/IDS 
Plus IPsec 3DES
Enterprise 
Plus/H323 MCM
Multiservice Applications - Broadband DSL
1 Port G.SHDSL WAN Interface Card
Yes
Yes
Yes
Yes
Quality of Service
Voice and IP Quality of Service Features on the ADSL 
and G.SHDSL WAN Interface Cards
Yes
Yes
Yes
Yes