Cisco Cisco IOS Software Release 12.4(2)XB6 Technical References
-21
Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.4 Command Reference, IOS Release 12.4(15)XL5
clear wimax agw path
clear wimax agw path
To enable the BWG to resync to a specific BS, use the clear wimax age path command in privileged
EXEC mode.
EXEC mode.
clear wimax agw path bs-ip-addr [local] [reset-bs]
Syntax Description
Defaults
There are no default values.
Command Modes
Privileged EXEC
Usage Guidelines
Examples
The following example illustrates how to enable the clear wimax agw path command:
router#clear wimax agw path 10.10.10.10 reset-bs
bs-ip-address
IP address of a specific base station.
local
Clears local sessions on the specified BS.
reset-bs
Prompts the BWG to clean up all the sessions belonging to the specified BS
(if any), and to send a keep-alive message (with its current reset time) to that
BS to indicate that the BWG restarted so that BS is guaranteed to clear its
sessions
(if any), and to send a keep-alive message (with its current reset time) to that
BS to indicate that the BWG restarted so that BS is guaranteed to clear its
sessions
Release
Modification
12.4(15)xx
This command was introduced.