Cisco Cisco IOS Software Release 12.2(27)SBC

To show when the idle timer or dead timer has expired, when test packets are being sent, server response 
status, and the server state for RADIUS server load balancing, use the debug aaa test command in 
privileged EXEC mode. To disable debugging output, use the no form of this command.

debug aaa test 

This command has no arguments or keywords.

Debugging is not enabled.

Privileged EXEC

In the following sample output, the RADIUS server load balancing feature is enabled. The idle timer has 
expired.

Router# debug aaa test

Router# 

Jul 16 00:07:01: AAA/SG/TEST: Server (192.0.2.245:1700,1701) quarantined.

Jul 16 00:07:01: AAA/SG/TEST: Sending test request(s) to server (192.0.2.245:1700,1701)

Jul 16 00:07:01: AAA/SG/TEST: Sending 1 Access-Requests, 1 Accounting-Requests in current 

batch.

Jul 16 00:07:01: AAA/SG/TEST(Req#: 1): Sending test AAA Access-Request.

Jul 16 00:07:01: AAA/SG/TEST(Req#: 1): Sending test AAA Accounting-Request.

Jul 16 00:07:01: AAA/SG/TEST: Obtained Test response from server (192.0.2.245:1700,1701)

Jul 16 00:07:01: AAA/SG/TEST: Obtained Test response from server (192.0.2.245:1700,1701)

Jul 16 00:07:01: AAA/SG/TEST: Necessary responses received from server 

(192.0.2.245:1700,1701)

Jul 16 00:07:01: AAA/SG/TEST: Server (192.0.2.245:1700,1701) marked ALIVE. Idle timer set 

for 60 sec(s).

Jul 16 00:07:01: AAA/SG/TEST: Server (192.0.2.245:1700,1701) removed from quarantine.

12.2(28)SB

This command was introduced.

12.4(11)T

This command was integrated into Cisco IOS Release 12.4(11)T.

Enables RADIUS server load balancing for named RADIUS server groups.

Enables RADIUS automated testing for load balancing.