Cisco Cisco AnyConnect Secure Mobility Client v2.x Technical Manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Configure
Network Diagram
ASA as a Local CA Server
Step 1. Configure and enable the Local CA Server on ASA
Step 2. Create and add users to the ASA database
Step 3. Enable webvpn on the WAN interface
Step 4. Import the certificate on the client machine
ASA as a SSL gateway for AnyConnect Clients
ASDM AnyConnect Configuration Wizard
Configure CLI for AnyConnect
Verify
Troubleshoot
Related Information
Introduction
This document describes how to setup a Cisco Adaptive Security Appliance (ASA) as a Certificate
Authority (CA) server and as a Secure Sockets Layer (SSL) gateway for Cisco AnyConnect
Secure Mobility Clients.
Authority (CA) server and as a Secure Sockets Layer (SSL) gateway for Cisco AnyConnect
Secure Mobility Clients.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Basic ASA configuration that runs software version 9.1.x
●
ASDM 7.3 or higher
●
Components Used
The information in this document is based on these software and hardware versions:
Cisco 5500 Series ASA that runs software version 9.1(6)
●
AnyConnect Secure Mobility Client version 4.x for Windows
●
PC which runs an supported OS per the
●
Cisco Adaptive Security Device Manager (ASDM) version 7.3
●