Cisco Cisco AnyConnect Secure Mobility Client v2.x Troubleshooting Guide
AnyConnect Hostscan Signature Verification Error
on Linux
on Linux
Document ID: 116040
Contributed by Atri Basu and Jay Young, Cisco TAC Engineers.
Oct 01, 2013
Oct 01, 2013
Contents
Introduction
Prerequisites
Requirements
Components Used
Problem
Solution
Prerequisites
Requirements
Components Used
Problem
Solution
Introduction
This document describes how to resolve a Cisco AnyConnect Secure Mobility Client connection error if you
deploy Hostscan on Linux.
deploy Hostscan on Linux.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco AnyConnect
•
Cisco Secure Desktop (CSD)
•
Linux
•
Components Used
The information in this document affects Linux users who run CSD Hostscan.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Problem
When a Linux user runs Cisco Anyconnect in conjunction with CSD Hostscan, an error message appears that
indicates the Posture Assessment Failed with a Hostscan Initialize error:
indicates the Posture Assessment Failed with a Hostscan Initialize error: