Cisco Cisco AnyConnect Secure Mobility Client v4.x Technical Manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Topology and Flow
Configure
WLC
ISE
Step 1. Add the WLC
Step 2. Configure the VPN Profile
Step 3. Configure the NAM Profile
Step 4. Install the Application
Step 5. Install the VPN/NAM Profile
Step 6. Configure the Posture
Step 7. Configure AnyConnect
Step 8. Client Provisioning Rules
Step 9. Authorization Profiles
Step 10. Authorization Rules
Verify
Troubleshoot
Related Information
Introduction
This document describes new functionality in Cisco Identity Services Engine (ISE) Version 1.3 that
allows you to configure several AnyConnect Secure Mobility Client modules and provision them
automatically to the endpoint. This document presents how to configure VPN, Network Access
Manager (NAM), and Posture modules on ISE and push them to the corporate user.
allows you to configure several AnyConnect Secure Mobility Client modules and provision them
automatically to the endpoint. This document presents how to configure VPN, Network Access
Manager (NAM), and Posture modules on ISE and push them to the corporate user.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
ISE deployments, authentication, and authorization
●
Configuration of Wireless LAN Controllers (WLCs)
●
Basic VPN and 802.1x knowledge
●
Configuration of VPN and NAM profiles with AnyConnect profile editors
●
Components Used