Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet

思科 ASA 系列命令参考，S 命令

第 3 章      show as-path-access-list 至 show auto-update 命令

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-invalid-mac

SVC Module found invalid L2 data in the frame:

    This counter will increment when the security appliance is finds an invalid L2 MAC 

header attached to data received from an SVC.

Recommendation:

    This indicates that a software error should be reported to the Cisco TAC.

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-invalid-mac-len

SVC Module found invalid L2 data length in the frame:

    This counter will increment when the security appliance is finds an invalid L2 MAC 

length attached to data received from an SVC.

Recommendation:

    This indicates that a software error should be reported to the Cisco TAC.

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-flow-control

SVC Session is in flow control:

    This counter will increment when the security appliance needs to drop data because an 

SVC is temporarily not accepting any more data.

Recommendation:

    This indicates that the client is unable to accept more data.The client should reduce 

the amount of traffic it is attempting to receive.

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-no-fragment

SVC Module unable to fragment packet:

    This counter is incremented when a packet to be sent to the SVC is not permitted to be 

fragmented or when there are not enough data buffers to fragment the packet.

Recommendation:

    Increase the MTU of the SVC to reduce fragmentation.Avoid using applications that do 

not permit fragmentation.Decrease the load on the device to increase available data 

buffers.

Syslogs:

    None.

----------------------------------------------------------------

Name: vpn-handle-error

VPN Handle Error:

    This counter is incremented when the appliances is unable to create a VPN handle 

because the VPN handle already exists.