Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet
4-38
思科 ASA 系列命令参考,S 命令
第 4 章 show bgp 至 show cpu 命令
show bgp ipv6 neighbors
Received 31306 messages, 20 notifications, 0 in queue
Sent 14298 messages, 1 notifications, 0 in queue
Default minimum time between advertisement runs is 30 seconds
For address family: IPv6 Unicast
BGP table version 21880, neighbor version 21880
Index 1, Offset 0, Mask 0x2
Route refresh request: received 0, sent 0
Community attribute sent to this neighbor
Outbound path policy configured
Incoming update prefix filter list is bgp-in
Outgoing update prefix filter list is aggregate
Route map for outgoing advertisements is uni-out
77 accepted prefixes consume 4928 bytes
Prefix advertised 4303, suppressed 0, withdrawn 1328
Number of NLRIs in the update sent: max 1, min 0
1 history paths consume 64 bytes
Connections established 22; dropped 21
Last reset 13:47:05, due to BGP Notification sent, hold time expired
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 3FFE:700:20:1::12, Local port: 55345
Foreign host: 3FFE:700:20:1::11, Foreign port: 179
Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes)
Event Timers (current time is 0x1A0D543C):
Timer Starts Wakeups Next
Retrans 1218 5 0x0
TimeWait 0 0 0x0
AckHold 3327 3051 0x0
SendWnd 0 0 0x0
KeepAlive 0 0 0x0
GiveUp 0 0 0x0
PmtuAger 0 0 0x0
DeadWait 0 0 0x0
iss: 1805423033 snduna: 1805489354 sndnxt: 1805489354 sndwnd: 15531
irs: 821333727 rcvnxt: 821591465 rcvwnd: 15547 delrcvwnd: 837
SRTT: 300 ms, RTTO: 303 ms, RTV: 3 ms, KRTT: 0 ms
minRTT: 8 ms, maxRTT: 300 ms, ACK hold: 200 ms
Flags: higher precedence, nagle
Datagrams (max data segment is 1420 bytes):
Rcvd: 4252 (out of order: 0), with data: 3328, total data bytes: 257737
Sent: 4445 (retransmit: 5), with data: 4445, total data bytes: 244128
下表描述屏幕上展示的重要字段。
表
4-16
show bgp ipv6 community-list
字段
字段
说明
BGP neighbor
BGP 邻居的 IP 地址及其自主系统编号。如果邻居位于与路由器相同的自主系
统中,则它们之间的链路是内部链路;否则,将该链路视为外部链路。
统中,则它们之间的链路是内部链路;否则,将该链路视为外部链路。
remote AS
邻居的自主系统。
internal link
表示此对等设备为内部边界网关协议
(iBGP) 对等设备。
BGP version
正在用于与远程路由器通信的
BGP 版本;还指定邻居的路由器 ID(IP 地址)。
remote router ID 一个 32 位数字,写为以句点分隔的 4 八位字节(点分十进制格式)。
BGP state
BGP state
此
BGP 连接的内部状态。
up for
基本
TCP 连接已存在的时间量。
Last read
BGP 最后从此邻居读取消息的时间。
hold time
对等设备的消息之间可消耗的最大时间量。