Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet
4-57
思科 ASA 系列命令参考,S 命令
第 4 章 show bgp 至 show cpu 命令
show bgp neighbors
4 字节的自主系统编号思科 /Cisco 实现使用 asplain - 例如 65538- 默认正则表达式匹配和输出显示
自主系统编号的格式,但您可以配置
自主系统编号的格式,但您可以配置
4 字节的自主系统编号 asplain 格式和 asdot 格式,在 RFC
5396 中所述。要将 4 字节自主系统编号的默认正则表达式匹配和输出显示更改为 asdot 格式,请
使用
使用
bgp asnotation dot 命令后跟 clear bgp * 命令执行所有当前 BGP 会话的硬重置。
示例
show bgp neighbors
命令可用的各种关键字的输出示例是不同的。使用各种关键字的示例显示在
以下部分中:
show bgp neighbors:示例
以下示例展示位于
10.108.50.2 的 BGP 邻居的输出。此邻居是内部 BGP (iBGP) 对等设备。此邻居
支持路由刷新和平滑重启功能。
ciscoasa# show bgp neighbors 10.108.50.2
BGP neighbor is 10.108.50.2, remote AS 1, internal link
BGP version 4, remote router ID 192.168.252.252
BGP state = Established, up for 0:24:25
Last read 00:00:24, last write 00:00:24, hold time is 180, keepalive interval is
60 seconds
Neighbor capabilities:
Route refresh: advertised and received(old & new)
MPLS Label capability: advertised and received
Graceful Restart Capability: advertised
Address family IPv4 Unicast: advertised and received
Message statistics:
InQ depth is 0
OutQ depth is 0
Sent Rcvd
Opens: 3 3
Notifications: 0 0
Updates: 0 0
Keepalives: 113 112
Route Refresh: 0 0
Total: 116 115
Default minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP additional-paths computation is enabled
BGP advertise-best-external is enabled
BGP table version 1, neighbor version 1/0
Output queue size : 0
Index 1, Offset 0, Mask 0x2
1 update-group member
Sent Rcvd
Prefix activity: ---- ----
Prefixes Current: 0 0
Prefixes Total: 0 0
Implicit Withdraw: 0 0
Explicit Withdraw: 0 0
Used as bestpath: n/a 0
Used as multipath: n/a 0
Outbound Inbound
Local Policy Denied Prefixes: -------- -------
Total: 0 0
Number of NLRIs in the update sent: max 0, min 0
Connections established 3; dropped 2
Last reset 00:24:26, due to Peer closed the session
External BGP neighbor may be up to 2 hops away.