Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet
4-75
思科 ASA 系列命令参考,S 命令
第 4 章 show bgp 至 show cpu 命令
show bgp summary
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.100.1.1 4 200 26 22 199 0 0 00:14:23 23
10.200.1.1 4 300 21 51 199 0 0 00:13:40 0
显示每个字段的说明。
表
4-25
show bgp summary
字段
字段
说明
BGP router
identifier
identifier
按照优先级和可用性、
bgp router-id
命令指定的路由器标识符、环回地址或
最高
IP 地址的顺序。
BGP table
version
version
BGP 数据库的内部版本号。
main routing
table version
table version
注入主路由表中的
BGP 数据库的上一版本。
...network entries BGP 数据库中的单一前缀条目的数量。
...using ... bytes
of memory
...using ... bytes
of memory
为同一行上显示的路径、前缀或属性条目所消耗的内存量(以字节为单位)。
...path entries
using
using
BGP 数据库中的路径条目的数量。仅会为给定目标安装一个路径条目。如果
配置多路径路由,则会为每个多路径路由安装一个路径条目。
配置多路径路由,则会为每个多路径路由安装一个路径条目。
...multipath
network entries
using
network entries
using
为给定目标安装的多路径条目的数量。
* ...BGP
path/bestpath
attribute entries
using
path/bestpath
attribute entries
using
单一
BGP 属性组合的数量,其中选择这些组合的路径为最佳路径。
* ...BGP rrinfo
entries using
entries using
单一
ORIGINATOR 和 CLUSTER_LIST 属性组合的数量。
...BGP AS-PATH
entries using
entries using
单一
AS_PATH 条目的数量。
...BGP
community
entries using
community
entries using
单一
BGP 社区属性组合的数量。
*...BGP extended
community
entries using
community
entries using
单一扩展的社区属性组合的数量。
BGP route-map
cache entries
using
cache entries
using
BGP 路由映射 match 和 set 子句组合的数量。0 值表示路由缓存为空。
...BGP filter-list
cache entries
using
cache entries
using
与
AS 路径访问列表 permit 或 deny 语句匹配的过滤器列表条目的数量。0 值
表示过滤器列表缓存为空。
BGP
advertise-bit
cache entries
using
advertise-bit
cache entries
using
(仅限于思科
IOS 版本 12.4(11)T 及更高版本)通告的位域条目的数量和关联
的内存使用率。位域条目表示向对等设备通告前缀时生成的一部分信息(一
个位)。在需要时动态构建通告的位缓存。
个位)。在需要时动态构建通告的位缓存。