Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet
4-76
思科 ASA 系列命令参考,S 命令
第 4 章 show bgp 至 show cpu 命令
show bgp summary
show bgp summary
命令的以下输出展示动态创建 BGP 邻居 192.168.3.2,且它是侦听范围组
group192 的成员。输出还展示为名为 group192 的侦听范围组定义 192.168.0.0/16 的 IP 前缀范围。
在思科
在思科
IOS 版本 12.2(33)SXH 及更高版本中,BGP 动态邻居功能引入了使用与对等设备组(侦听
范围组)关联的子网范围支持动态创建
BGP 邻居对等设备的能力。
ciscoasa# show bgp summary
BGP router identifier 192.168.3.1, local AS number 45000
BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
*192.168.3.2 4 50000 2 2 0 0 0 00:00:37 0
* Dynamically created based on a listen range command
Dynamically created neighbors: 1/(200 max), Subnet ranges: 1
BGP peergroup group192 listen range group members:
192.168.0.0/16
show bgp summary 命令的以下输出展示两个采用不同
4 字节自主系统编号(65536 和 65550)的
BGP 邻居(192.168.1.2 和 192.168.3.2)。本地自主系统 65538 也是一个 4 字节自主系统编号,且
编号以默认
编号以默认
asplain 格式显示。
Router# show bgp summary
BGP router identifier 172.17.1.99, local AS number 65538
BGP table version is 1, main routing table version 1
...received paths
for inbound soft
reconfiguration
for inbound soft
reconfiguration
为入站软重新配置收到和存储的路径的数量。
BGP using...
BGP 进程使用的内存总量(以字节为单位)。
Dampening
enabled...
enabled...
表示启用
BGP 阻尼。携带累积处罚规则的路径的数量和阻尼的路径的数量显
示在此行上。
BGP activity...
显示已为路径或前缀分配或释放内存的次数。
Neighbor
邻居的
IP 地址。
V
向该邻居传达的
BGP 版本号。
AS
自主系统编号。
MsgRcvd
从邻居收到的消息的数量。
MsgSent
发送给邻居的消息的数量。
TblVer
发送给邻居的
BGP 数据库的上一版本。
InQ
要从邻居排队处理的消息的数量。
OutQ
要排队发送给邻居的消息的数量。
Up/Down
BGP 会话处于 “ 已建立 ” 状态或当前状态(如果它不处于 “ 已建立 ” 状
态)的时间长度。
态)的时间长度。
State/PfxRcd
BGP 会话的当前状态和已从邻居或对等设备组收到的前缀的数量。达到(如
neighbor maximum-prefix
neighbor maximum-prefix
命令所设置)最大数量时,条目中显示字符串
“
PfxRcd”,邻居会关闭,且连接处于 “ 空闲 ” 状态。
具有空闲状态的
(Admin) 条目表示使用 neighbor shutdown 命令已关闭连接。
表
4-25
show bgp summary
字段(续)
字段
说明