Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet
4-136
思科 ASA 系列命令参考，S 命令
第 4 章 show bgp 至 show cpu 命令
show controller
TX Descriptor 0 AddrHi: 0xf8263804 = 0x00000000
TX Descriptor 0 Length: 0xf8263808 = 0x00001000
TX Descriptor 0 Head: 0xf8263810 = 0x00000000
TX Descriptor 0 Tail: 0xf8263818 = 0x00000000
RX Address Array:
Ethernet Address 0: 0012.d948.ef58
Ethernet Address 1: Not Valid!
Ethernet Address 2: Not Valid!
Ethernet Address 3: Not Valid!
Ethernet Address 4: Not Valid!
Ethernet Address 5: Not Valid!
Ethernet Address 6: Not Valid!
Ethernet Address 7: Not Valid!
Ethernet Address 8: Not Valid!
Ethernet Address 9: Not Valid!
Ethernet Address a: Not Valid!
Ethernet Address b: Not Valid!
Ethernet Address c: Not Valid!
Ethernet Address d: Not Valid!
Ethernet Address e: Not Valid!
Ethernet Address f: Not Valid!
PHY Registers:
Phy Control: 0x1140
Phy Status: 0x7969
Phy ID 1: 0x0141
Phy ID 2: 0x0c25
Phy Autoneg Advertise: 0x01e1
Phy Link Partner Ability: 0x41e1
Phy Autoneg Expansion: 0x0007
Phy Next Page TX: 0x2801
Phy Link Partnr Next Page: 0x0000
Phy 1000T Control: 0x0200
Phy 1000T Status: 0x4000
Phy Extended Status: 0x3000
Detailed Output - RX Descriptor Ring:
rx_bd[000]: baddr = 0x019823A2, length = 0x0000, status = 0x00
pkt chksum = 0x0000, errors = 0x00, special = 0x0000
rx_bd[001]: baddr = 0x01981A62, length = 0x0000, status = 0x00
pkt chksum = 0x0000, errors = 0x00, special = 0x0000
........
以下是
show controller detail 命令的输出示例，该命令用于通过 ASA 5555-X 的 ASA 5512-X 上
的内部接口：
ciscoasa# show controller detail
Internal-Control0/0:
ASA IPS/VM Back Plane TunTap Interface , port id 9
Major Configuration Parameters
Device Name : en_vtun
Linux Tun/Tap Device : /dev/net/tun/tap1
Num of Transmit Rings : 1
Num of Receive Rings : 1
Ring Size : 128
Max Frame Length : 1550
Out of Buffer : 0
Reset : 0
Drop : 0