Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet
5-78
思科 ASA 系列命令参考,S 命令
第 5 章 show crashinfo 至 show curpriv 命令
show cts sxp connections
•
如果
SXP 侦听程序由于其对等设备崩溃或接口关闭而丢弃其 SXP 连接,则 SXP 侦听程序转
为
DELETE_HOLD_DOWN 状态。
•
出现前两个条件的任意一个时,
SXP 扬声器将转为 OFF(关闭)状态。
此命令在故障切换配置的备用设备中不受支持。如果您在备用设备上输入此命令,将显示以下错
误消息:
误消息:
ERROR: This command is only permitted on the active device.
此命令仅在集群配置的主控设备上受支持。如果您在从属设备上输入此命令,将显示以下错误
消息:
消息:
This command is only permitted on the master device.
示例
以下是
show cts sxp connections 命令的输出示例:
ciscoasa# show cts sxp connections
SXP : Enabled
Highest version : 2
Default password : Set
Default local IP : Not Set
Reconcile period : 120 secs
Retry open period : 10 secs
Retry open timer : Not Running
Total number of SXP connections : 3
Total number of SXP connection shown : 3
----------------------------------------------
Peer IP : 2.2.2.1
Local IP : 2.2.2.2
Conn status : On
Local mode : Listener
Ins number : 1
TCP conn password : Default
Delete hold down timer : Not Running
Reconciliation timer : Not Running
Duration since last state change: 0:00:01:25 (dd:hr:mm:sec)
----------------------------------------------
Peer IP : 3.3.3.1
Local IP : 3.3.3.2
Conn status : On
Local mode : Listener
Ins number : 2
TCP conn password : None
Delete hold down timer : Not Running
Reconciliation timer : Not Running
Duration since last state change: 0:01:02:20 (dd:hr:mm:sec)
----------------------------------------------
Peer IP : 4.4.4.1
Local IP : 4.4.4.2
Conn status : On
Local mode : Speaker
Ins number : 1
TCP conn password : Set
Delete hold down timer : Not Running
Reconciliation timer : Not Running
Duration since last state change: 0:03:01:20 (dd:hr:mm:sec)