Cisco Cisco ASA 5510 Adaptive Security Appliance Leaflet

Cisco ASA Series 명령 참조 , S 명령

3장      show as-path-access-list through show auto-update 명령              

Name: mp-svc-bad-length

SVC Module received bad data length:

    This counter will increment when the security appliance receives a packet from an SVC 

or the control software where the calculated and specified lengths do not match.

Recommendation:

    This indicates that a software error should be reported to the Cisco TAC. The SVC or 

security appliance could be at fault.

Syslogs:

    722037 (Only for SVC received data).

----------------------------------------------------------------

Name: mp-svc-unknown-type

SVC Module received unknown data frame:

    This counter will increment when the security appliance receives a packet from an SVC 

where the data type is unknown.

Recommendation:

    Validate that the SVC being used by the client is compatible with the version of 

security appliance software.

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-addr-renew-response

SVC Module received address renew response data frame:

    This counter will increment when the security appliance receives an Address Renew 

Response message from an SVC. The SVC should not be sending this message.

Recommendation:

    This indicates that an SVC software error should be reported to the Cisco TAC.

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-no-prepend

SVC Module does not have enough space to insert header:

    This counter will increment when there is not enough space before the packet data to 

prepend a MAC header in order to put the packet onto the network.

Recommendation:

    This indicates that a software error should be reported to the Cisco TAC.

Syslogs:

   None.

----------------------------------------------------------------

Name: mp-svc-no-channel

SVC Module does not have a channel for reinjection:

    This counter will increment when the interface that the encrypted data was received 

upon cannot be found in order to inject the decrypted data.

Recommendation:

    If an interface is shut down during a connection, this could happen; re-enable/check 

the interface. Otherwise, this indicates that a software error should be reported to the 

Cisco TAC.